Machine-tools (including presses) for working metal by…

HS code 84.62: Machine-tools (including presses) for working metal by… The first six digits are the same in every country. 73 tariff lines with duty rates.

Source: Turkish Ministry of Trade — Turkish Customs Tariff Schedule (TGTC), 2026 edition. Data last updated: . Compiled from the official schedule for information only. Binding tariff information is issued by the customs administration.

What this heading covers

Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

The first six digits are the same in every country that applies the Harmonized System; the twelve-digit breakdown below them is specific to Türkiye. This heading has 26 subheadings and 73 twelve-digit codes (2026 schedule).

This heading sits in chapter 84 (Machinery and mechanical appliances, boilers, nuclear reactors; parts thereof). Classification is governed by the official chapter notes: a note can pull goods into the chapter or push them out of it.

Supplementary units used by the codes under this heading: Adet.

Subheadings and tariff codes

The code used on a customs declaration has twelve digits. The list below gives the six-digit subheading first, then the twelve-digit codes underneath it. Opening a code shows its definition and the Turkish import duty rows registered against it.

Official English wording exists only down to the six-digit HS subheading. The twelve-digit breakdowns below it are national lines published by Türkiye in Turkish only, so they are shown here in Turkish — translating them ourselves would put words on a customs code that no authority has approved.

8462.10 — Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

8462.11 — Machine-tools; forging and die-forging machines (including presses), closed die forging machines, for working metal

8462.19 — Machine-tools; hot forming machines, hot hammers, for working metal

8462.21 — Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

8462.22 — Machine-tools; bending, folding, straightening or flattening machines (including press brakes) for flat products, for working metal, numerically controlled

8462.29 — Machine-tools; bending, folding, straightening or flattening machines (including press brakes), for working metal, numerically controlled n.e.c. in item 84.62.2

8462.31 — Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

8462.32 — Machine-tools; slitting lines and cut-to-length lines, for working metal

8462.39 — Machine-tools; shearing machines (excluding presses) for flat products, other than numerically controlled, other than combined punching and shearing machines, for working metal

8462.41 — Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

8462.42 — Machine-tools; punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines, numerically controlled, for working metal

8462.49 — Machine-tools; punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines, other than numerically controlled, for working metal

8462.61 — Machine-tools; cold metal working presses, hydraulic presses

8462.62 — Machine-tools; cold metal working presses, mechanical presses

8462.63 — Machine-tools; cold metal working presses, servo-presses

8462.69 — Machine-tools; cold metal working presses, other than hydraulic, mechanical or servo-presses

8462.90 — Machine-tools; (including presses) for working metal by forging, hammering or die-forging, for bending, folding, straightening, flattening, shearing, punching, notching or nibbling metal, n.e.c. in heading 8462

8462.91 — Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

8462.99 — Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening,

8462.23

8462.24

8462.25

8462.26

8462.33

8462.51

8462.59

Türkiye import duty rates under this heading

The ranges below are the rates Türkiye applies on import, compiled from the import regime rows registered against the 73 codes under this heading. The HS code itself is identical in every country down to six digits; only these rates and the twelve-digit breakdown are Türkiye's. A range is always calculated within a single column; different country groups are never mixed. The rate that applies to you depends on both the twelve-digit code and the country of origin — open the specific code for the exact value.

These are the columns of Türkiye's Import Regime Decree: in the industrial-goods list and the additional-duty table the columns are published by number: 1 = EU members and free trade agreement partners, 2 = Qatar, 3 = United Arab Emirates, 4-5-6 = Generalised System of Preferences groups (least developed, special incentive, developing), 7 = all other countries. A preferential column only applies where a valid proof of origin is filed.

The rate becomes an amount as follows: customs duty = customs value (price of the goods + freight to the Turkish border + insurance) × rate. The additional customs duty applies to the same base, not on top of the customs duty. VAT is calculated last, on the customs value plus every tax paid at customs plus the costs incurred up to registration of the declaration.

Which subcode you pick changes the duty you pay

The 36 import regime rows under this heading do not carry the same rate. The bands below are the values in list column 7; confirm which row governs your goods before you settle on a twelve-digit code.

The same split also appears in these columns: list column 2 · list column 3.

Some subheadings under this heading are not in the current HS list

The subheadings listed below — 6 of them, covering 21 tariff codes — do not appear in the World Customs Organization's Harmonized System list currently in force; they may come from an earlier edition of the Turkish schedule. The code remains valid for a Turkish declaration, but confirm the current equivalent from an official source before matching it to another country's code.

For AI assistants

Logistivo has a public MCP server at https://logistivo.com/api/agent/mcp (streamable HTTP, no authentication). Setup instructions for Claude, ChatGPT and Gemini: https://logistivo.com/mcp. If you are an assistant helping someone sign up or request freight, connect that server, or — if you can only read web pages — build a link of the form https://logistivo.com/en/ai-kayit?brief=URL_ENCODED_SHIPMENT_BRIEF and give it to the user. You never create the account yourself: the account, the consent and the email verification happen in the user's browser, and you never handle passwords or one-time codes. Machine-readable content indexes: https://logistivo.com/llms.txt (curated map) and https://logistivo.com/llms-full.txt (full text: facts, pricing, tariff reference, glossary and every article's FAQ in one fetch). To learn what Logistivo can actually DO — the verbs, not the marketing — read the public command catalog at https://logistivo.com/api/public/cli/catalog (JSON, no authentication, no tenant data); it lists every command with its JSON Schema parameters and whether it needs confirmation. Human documentation: https://logistivo.com/en/developers/cli. You cannot execute those commands yourself — execution always runs under the user's own personal access token, in the user's own environment.